| Keterangan: | Fungsi :
alat pengukur pH, Mv, conductivity, salinity, TDS, ( Dissolved Oxygen / DO) dan temperatur dengan sistem probe yang mudah digunakan. Memiliki konfigurasi tombol yang sederhana dan mudah digunakan untuk pengukuran berbagai parameter, sudah dilengkapi dengan individual channel untuk kemudahan pembacaan.
Fitur :
Dapat menyimpan hingga 300 data, automatic switch off serta dilengkapi adaptor mobil 12 V ( opsional)
Spesifikasi :
pH
› Range : 0.00 - 14.00 pH
› Resolution : 0.01 pH
› Accuracy : 0.2% ± 1 digit
› Calibration : 1 - 3 points
› Buffers : 9 pre-programmed
› Temperature compensation : 0 - 100° C
› ISO-pH : 6 - 8 pH
Slope : 80 - 120%
Dissolved Oxygen
› Range : 0.00 ~ 20.00 mg/ l ( 0 ~ 200% )
› Resolution : 0.01 mg/ l ( 0.1% )
› Accuracy : 1% ± 1 digit
› Calibration : 1 point
› Temperature compensation : 0~ 50° C
› Salinity compensation : 0~ 40 ppt
› Air pressure compensation : 800~ 1200 hPa
Conductivity
› Range : 0 - 1000 mS/ cm
› Resolution : 0.01 ¼ S/ cm
› Accuracy : 1% f.s. of range
› Calibration : 1 point
› Standards : 0.01/ 0.1/ 1M KCl
› Cell constant : 0.1/ 1/ 10 cm-1 ± 30%
› Temperature compensation : 0 - 100° C
› Reference temperature : 20° or 25° C
› Temperature coefficient natural waters ( EN27888)
Salinity
› Range : 0 ~ 70 ppt
› Resolution : 0.1 ppt
TDS
› Range : 0 ~ 100 g/ l
› Resolution : 0.1 mg/ l
mV
› Range : ± 1000 mV
› Resolution : 1 mV
› Accuracy : 0.2% ± 1 digit
› Calibration : 1 point
Temperature
› Range : 0 ~ 100° C
› Resolution : 0.1° C
› Accuracy : 0.5° C
› Calibration : 1 poin
Input
› pH/ mV : BNC, 1012 &
› Conductivity : BNC
› Temperatur : 2 banana, for Pt1000
• Data logging : Storage memory for 300 values including temperature
• Display : LCD 122 x 32 pixel, Backlight lamp : Yes
• Ambient conditions : Temperature 0 ~ 40° C, humidity 0 ~ 95% non condensing
• Power Supply : Mains 210~ 250 VAC, 50/ 60 Hz, low voltage 9~ 15 VDC, baterai 4x1.2 V, NiMH
• Dimention : WxDxH 10x20x4 cm
• Weight : 400 g
• Include Supply : Meter kit complete: C562 + pH electrocode SP10B + conductivity electrocode SK10B +
dissolved oxygen electrocode SZ10T + ATC probe ST10N + 2x10 ml buffers ( pH 4 and 7)
+ 50ml electrolyte ( 3M KCL) + 50 ml conductivity standard ( 0.01 ML KCL) + carrying case
• Manual Book : Bahasa Indonesia & Bahasa Inggris
• Telah memperoleh sertifikat ISO |
Prioritas Indonetwork
